产品中心
通辽XCMG GR215 Grader
It adopts low-speed engine transmission route, low specific fuel consumption at rated points, energy saving and environmental protection; The transmission system is configured with a low speed ratio, and the average fuel consumption is reduced by about 8%; Three-stage vibration damping of engine, cab and seat; Cab six-point combination support; The engine is reduced frequency and deceleration, the fan has a large diameter and low speed ratio, the sound absorbing foam is attached to the hood, the cab is well sealed, and the noise of the whole machine is reduced.
Strong power: Dongkang high-efficiency national III variable power engine is adopted, matching Caifu gearbox, and the optimal torque converter circulating circle diameter is selected to achieve the best matching of torque converter and engine, reduce the vehicle starting and acceleration time, and increase the torque output at low speed, which is strong and powerful. Optional herringbone pattern tires can improve the adhesion of the vehicle by about 10% under loosening, leveling and other working conditions, further improving power output.
Load rotation: increase the pressure of the hydraulic system system, greatly improve the blade rotation force, high-frequency quenching treatment of the ring gear, improve wear resistance and life, and realize the load swing operation.
Efficient operation: Increased hydraulic pump and motor displacement, 20% higher cylinder speed, industry-leading efficiency, optimized blade arc for fast and efficient soil turning and draining, optimal load distribution and minimal material build-up in the carousel area.
Safe and reliable: full hydraulic brake system, load sensing steering system, international matching of key components, safe and reliable system; CAE global optimization of structural parts, special research in cooperation with universities and research institutes.
类别:
产品描述
Engine model Cummins QSB6.7
Rated power/speed 164kW/2200kW/rpm
Forward speed 5, 8, 11, 19, 23, 38km/h
Reverse speed 5, 11, 23km/h
Traction force f=0.75 118kN
Minimum turning radius 7.3m
Blade length x chord height (mm)
The overall dimensions of the machine are 9180x2625x3420 mm
Total weight 16100kg
下一条